Categories

Manufacturer
Newsletter
*Email

Name

GO

AeroFlash BASIC

AeroFlash BASIC
AeroFlash BASIC AeroFlash BASIC AeroFlash BASIC AeroFlash BASIC AeroFlash BASIC AeroFlash BASIC AeroFlash BASIC AeroFlash BASIC AeroFlash BASIC AeroFlash BASIC AeroFlash BASIC AeroFlash BASIC
Brand: AeroFLASH AeroFLASH
Product Code: AEROFLASH-BASIC
Availability: 11 in stock
Price: 699.00€ 599.00€
Ex Tax: 495.04€

Available Options


* LED color & quantity:



* Glider/Aircraft type:

* Canopy opening direction:



* FuselageFlasher 1 color:



Qty:  
   - OR -   

AeroFlash BASIC

 

 
 
An all-in-one, cost-effective and simple AeroFlash kit. One CanopyFlasher. One FuselageFlasher. One PowerBox PRO.

 

Stand alone. Nothing complicated. We call it BASIC.

 

CanopyFlasher – canopy mounted, forward-facing flasher

Six extremely bright red CREE™ LEDs built into an elegant, low profile Space Grey (Nextel like) enclosure, mounted in the front of the canopy. CanopyFlasher is made from a high strength, UV resistant ABS based polymer. Out of sight for you, but not for others:

Extremely bright

The heart of the CanopyFlasher is the array of 6 extremely bright CREE LED’s emitting approximately 4000-4500 lumens, with powerful, oval lenses; two beams orientated vertically, and 4 beams orientated horizontally. This makes the Flasher well visible at distances of even up to 3500m, ±30 degrees above and below- and up to ±45 degrees left and right of the nose.

Safe to install

The CanopyFlasher system incorporated many safety features, like heat sinks, a temperature sensor to prevent overheat conditions and two status LED’s for indication of the operating mode and warnings.

Suitability

CanopyFlasher is suitable for almost every glider, with canopies opening vertically and sideways.

FuselageFlasher LITE

Elegant and aerodynamic fuselage mounted strobe. 360º. Tiny.

 
 
 

Measuring at 110mm long, 15mm wide and only 11mm high, the AeroFlash FuselageFlasher is extremely elegant and streamlined, made out of a super clear UV-resistant epoxy. Its small size does not say much about its ability: with 16, yes sixteen extremely bright red or white CREE™ LEDs (±7500-8500 Lumen!), the strobe is very well visible at distances up to 3km.

Mount it on top of the fuselage, on the bottom. Only one small hole of 4mm is required for the cable. Mount it on a wheel door, or on an engine bay door for the least amount impact on the airframe, and maximum visibility.

 

 

The AeroFlash BASIC system comes together with PowerBox PRO:

 

 

PowerBox PRO

PowerBox PRO is fully stand-alone. It powers the CanopyFlasher, one FuselageFlasher and provides synchronised flashing sequencing logic. This PowerBox PRO is not connectable to Flarm and does not have Bluetooth features. It’s a simple, cost-effective solution for those who do not need all the “luxury” features.

Temperature protection

PowerBox PRO continuously monitors the temperature of the CanopyFlasher system. If an overheat situation is present, it automatically shuts down the system to prevent damage to the system and to your expensive canopy. After a short cooling the system will restart automatically if conditions permit. Don’t worry, the system generally doesn’t get very warm in flight, but in summer conditions on ground without air flow your glider is well protected.

Easy Connection

A neat removable screw-terminal system allows a quick connection of the power wires, and easy removal when needed. No need for soldering; everything is plug-and-fly.

Compact

PowerBox PRO is compact and lightweight: it measures 100 x 63 x 31mm (including mounting flanges) and weighs only 190 grams.

Power Consumption

Due to PowerBox PRO’s synchronised flashing logic, power consumption is very reasonable and should not be an obstacle to installing AeroFlash.

 

Red or white LEDs? Your choice…

Let’s explain the pros and cons:

Red:

+ Better visibility of a white glider against a grey/white background. This is the most dangerous situation. Red clearly stands out.

+ Red means danger.

– Slightly less brightness than white LEDs.

White:

+ Slightly better brightness compared to red LEDs.

+ Better visibility against a brown/green background.

– Reduced visibility of a white glider against a grey/white background (in clouds, haziness, snowy terrain, etc).

Conclusion:

We recommend RED. This gives the best result in the most dangerous situations, where it would be very difficult to be seen otherwise.

 

DSC_32342
 

Scope of Delivery

Complete as you’d expect.

 

1x PowerBox PRO device.
1x FuselageFlasher (Red or White LEDs) with 4m cable.
1x CanopyFlasher with 3M double sided adhesive foam tape pre-applied and 100cm cable set.
1x 100cm DB9-DB9 extension cable.
1x PowerBox cable set with OFF/ON switch with marking/label.
1x 3M Dual Lock adhesive tape for mounting of PowerBox.
1x Vinyl template for aligning the CanopyFlasher during installation.

Simply connect it to your power supply.
Plug-and-Fly.

 

 
Complete.

 

 
Complete.

Canopy opening directions – different cable harnesses

Vertical opening – universal

Vertically opening canopies need an easy to attach, but most importantly, easy to DETACH connector. When jettisoning the canopy in case of an emergency, our connectors are designed to easily separate.

The AeroFLASH installation consists of commonly seen male and female DB9 (D SUB 9) type connectors for the data cables (status LEDs and temperature sensor), and for the power supply of the CanopyFlasher. It is sturdy, easy to attach, separate, and highly suited for the currents.

 

There are no reviews for this product.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: