Solar power package for glider trailers

Complete Solar Package for Trailer consisting of the following:

• Ective 4-in-1 Solar system [value 368 EUR], one compact box consisting of;
• 1000W 12V-230V Sinus inverter.
• MPPT Solar Charge controller.
• Built-in charger for charging the buffer battery via solar or via 230V grid power.
• UPS mode with priority switching logic over solar vs 230V grid power.
• Ective K04 remote control box for easy control of the system.

• 2x 100W Flexible Solar panels (1150x535x3mm). [value 478 EUR]

• All required cables, connectors and accessories included;
• 1 set (male/female) MC4 connectors. [value ±10 EUR]
• 1 set (male/female) MC4-Y-coupler (to connect 2 solar panels in parallel). [value ±15 EUR]
• 4mm2 (12AWG) solar cable, color black/red, length 5m, male/female MC4 connectors already fitted, other side open ending. [value ±45 EUR]
• 35mm2 (2AWG) battery cable, color black/red, length 1m, connectors fitted. [value ±50 EUR]
• FAWO CEE 230V input socket for grid charging, with 3m cable with grounding. [value ±25 EUR]
• 230V plug divider with 6 slots, dust- and humidity proof. [value ±25 EUR]
• White color UV- and weather proof mounting kit for solar panels. [value ±25 EUR]

Due to shipping weight and certain battery-carriage restrictions, this set does not come standard with the buffer battery. We can ship our recommended types within Europe;

• AGM Deep Cycle Solar Battery 12V 100Ah: shipment only possible within The Netherlands and Belgium.
• ECTIVE DC 100 AGM Deep Cycle 100Ah: shipment possible within Germany and the rest of Europe. For the rest of Europe, shipping costs are higher.

Of course no need to select either of the batteries above... If arranging your own battery, it's very important to make sure it is suitable for DEEP CYCLE or SOLAR use. Not all batteries types can handle deep cycles! Also make sure it's a safe spill-free AGM-type battery, which can be mounted safely on it's side.

Delivery time roughly 1-2 weeks, depending on our stock of solar panels and the Ective SSI102 (please check our website for available quantities).

This complete kit will save you around 100 EUR.

Your to do list and system ideas:
Install buffer battery and 4-in-1 system to the front side of the trailer, close to the axle as possible due to weight.
Install solar panels on top of the trailer.
Route and connect cables from the solar panels to the 4-in-1 system.
Connecting the 4-in-1 system to the buffer battery.
Connecting the 4-in-1 system to your own battery chargers.
Connecting those chargers to a cable that runs to the glider's batteries.
Add lighting in the trailer, connect to 12V buffer battery.
Add 12V power supply to the front and rear for water pumps.
Add GSM/Cell anti-theft tracker to 12V power supply. 

Installation examples

Michael Seidel |
04/04/2020

Eine Einbau bzw. Anschlussanleitung wäre sinnvoll.

Showing 1 to 1 of 1 (1 Pages)

Write a review